5 Ways To Flash Any Huawei Smartphone

REQUIREMENTS

 Your Phone must be at last 50% charged
 SD Card 4 GB
 Huawei Stock firmware
 Huawei drivers

Here are step by step on how to flash Huawei stock ROM firmware without computer

METHOD 1

1. Download Huawei stock firmware  "Update.zip & Data file upadate.zip" 

2. Create a new folder on you phone storage and rename it to "dload". Copy "UPDATE.ZIP & DATA FILE UPDATE.ZIP" to the dload folder. Power off your phone. 
Press and hold the Power button + Volume Up button at the same to boot into recovery mode

3. Go to install, locate the update.zip file and flash it

4. Locate the Data File update.Zip and flash it too
Once the flashing process is done, Click on the Wipe cache/dalvik to clean the stock ROM and reboot the phone.

METHOD 2

1. Download Huawei stock firmware Update.zip and extract it 

2. Copy the Update.App file on your SD CARD or on your phone storage
In your phone, open the dial and enter *#*#2846579#*#* project Menu-software upgrade-SD Card Upgrade-Ok

3. Select the update update.app. Now wait until the flashing process is successful
Once the installation done, the Huawei mobile phone will restart automatically

METHOD 3

1. Download the Stock firmware for your phone model

2. Create a new folder on your phone storage or on SD card and rename it to dload

3. Copy the firmware to the dload folder. 

4. power off the phone. Press and hold the power button + volume up + volume down at the same
Your phone will detect the firmware and start the update process automatically

Once the updating process is done. The phone will restart automatically. The first boot may take up to 5 minutes. 


METHOD 4

1. Download Huawei stock firmware Update.zip and extract it 

2. Copy the Update.App file on your SD CARD or on your phone storage

3. In your phone go to Settings-System update, tap on the 3 dots at the top right corner and then Tap on locale update and select the update.app you downloaded. Your Huawei Smartphone will begin updating

Method 5

This method needs computer, Huawei smartphone driver and USB cable

How to Flash Stock ROM Firmware on Huawei/Honor Smartphone using SP Flash tool

Important Notice

During the flashing process, the phone may reboot once or twice. Do not interrupt the flashing process as it could result in a dead phone

No comments

Note: Only a member of this blog may post a comment.