How to Flash Any MSTAR/W phone Using Miracle Box

IMPORTANT NOTICE

- Your Phone must be at last 50% charged

- Disable driver signature enforcement on your computer

- Install RDA USB  Drivers depending on your operating system bit installed on your computer

- Use Feature phone boot key and Smartphone Boot key

REQUIREMENTS

Download Miracle Box
After you have activated it. Run as an Administrator
Download Miracle Driver Installation Software

Download MSTAR Stock Firmware

How to flash any Mstar phone using Miracle Box. Use the following  method 

1. Launch Miracle box, Click the Mstar/W Tab, Write, and select "Boot select Auto Detect Mstar CPU

2. Click on folder icon as seen in the picture above. A new window should open. Navigate to the location of the MSTAR firmware, highlight it then click Open

3. Click start button

You should see Scanning USB Serial Port. Power off your phone, remove the battery and then connect your phone to the computer Via USB Cable.


Once the flashing process is complete, disconnect your phone from the computer, reinsert the battery and power on the phone.
You may also like How to Flash Any MSTAR/W Phone Using GSM Aladdin Box