How To Install MediaTek VCOM USB Drivers On Window PC - Step by Step

Installing phone drivers on window PC is very important in order to make your phone to be detected during the flashing process otherwise the flashing process will not be successful.

Before install drivers manually, you should disable driver signature enforcement on your computer

Important Notice

Through this method. You can install SPD, RDA and Coalcomm drivers on your computer. How to install Spreadtrum USB drivers on your computer

Here are step by step to follow to install Mediatek USB VCOM, SPD & COOOLSAND/RDA drivers and other unsigned drivers on your computer

METHOD 1

1. Download Miracle driver installation software and run on your computer. Agree and click Next

2. Choose the driver you want depending on your mobile phone device chipset type CPU (MTK, SPD, COOLSAND/RDA)

METHOD 2

1. Download MediaTek driver and extract on your computer

2. On Your computer keyboard, Press the Window button + E at the same time to open window explorer. Go to This PC or My computer if you are using window 8, Right click on the This PC or my computer and Press Manage.

3. Click on the Device Manage

4. Moving your cursor and click on the blank white page in the device Manage as shown in the image below. Click on Action and then Add legacy hardware

5. Click next

6. Select Install the hardware that i manually select from a list (Advanced) and click Next

7. Click on Next as seen in the image below

8. Click on Have Disk

9. Click browse and locate your Mediatek Vcom driver file. If you don't see your driver file. Click on back icon as seen in the image below. Select Mediatek driver depends on your operating system bit (32 bit or 64bit) installed on your computer

10. Select the VCOM USB drivers depends on your operating system bit installed ( 32bit & 64) and then Click open. It works on any window PC version (Window 7, 8, 8.1 & 10)