How to Use a Mediatek (MTK) Secure Boot Download (DA) File in SP Flash Tool and Miracle box
Download Miracle Box Thunder Edition
Password: View
Download Secure Boot Download Agent (DA) File
Download MediaTek USB VCOM Drivers or Miracle Driver Installation Software
Here are step by step on how to use MTK /AUTH Secure Boot Download (DA) File. How to flash MTK Secure boot Download Agent (DA) file on android mobile phone.
METHOD 1
Using Miracle Box
How to use MTK Secure Boot Download Agent (DA) File in Miracle Box
1. Launch Miracle box, Click the MediaTek Tab, Service, Write, and select Boot(DA_SWSEC(MT65XX & MT67XX)
2. Click on folder icon as seen in image above (Number 5). A new window should open, navigate to the location of the MTK AllinOne_DA_SP file. Highlight it then click Open
3. Click start button
4. You should see. Scanning Mobile USB port. Power off your phone, remove, reinsert the battery and connect your phone to the computer Via USB Cable.
Once the flashing process is complete, disconnect your phone from the computer, Remove, reinsert the battery and power on the phone.
During the flashing process, the phone may reboot once or twice. Do not interrupt the flashing process as it could result in a dead phone
METHOD 2
Using SP Flash Tool
Requirements
Download SP Flash Tool
Download MediaTek USB VCOM Drivers or Miracle driver installation Software
How to use MTK Secure Boot Download Agent (DA) File in SP Flash tool. Here are step by step on how to use DA file
1. Launch splash flash tool, Click on Download Agent file
2. Navigate to the location of the MTK DA File, highlight it then click Open
3. Click on download button.
4. Turn off your mobile phone, remove the battery, reinsert the battery and then connect your phone to your computer via USB cable. If you have encountered an error load the Scatter file from official Stock ROM
During the flashing process, the phone may reboot once or twice. Do not interrupt the flashing process as it could result in a dead phone
Important Notice
2. Navigate to the location of the MTK DA File, highlight it then click Open
3. Click on download button.
4. Turn off your mobile phone, remove the battery, reinsert the battery and then connect your phone to your computer via USB cable. If you have encountered an error load the Scatter file from official Stock ROM
During the flashing process, the phone may reboot once or twice. Do not interrupt the flashing process as it could result in a dead phone
Your Phone must be at last 50% charged
Disable driver signature enforcement on your computer
Install Mediatek USB VCOM Drivers depending on your operating system bit installed on your computer
Backup your Phone firmware before flashing (if there is a necessity)
Post a Comment